UK

Ireland Ireland
Eco Options

Teardrop Beachflag

Description

Are you looking to promote your business at the beach? Look no further than our teardrop beach flags! Quinnstheprinters's eye-catching... Show all quantities

Are you looking to promote your business at the beach? Look no further than our teardrop beach flags! Quinnstheprinters's eye-catching flags are the perfect way to get your brand noticed by beach goers. Not only are they highly visible, but they are also easy to set up and take down. Simply stake the flag into the ground and let the wind do the rest.

Note: By default, the tunnel band is on the left side of the print, as shown in the pictures.

  • Washable
  • Suitable for rough weather conditions
  • The material is slightly transparent, resulting in the print showing in reverse on the back

Eco-Friendly options available - learn more

Product specifications
Material Standard flag material: Polyester
Windproof material: Mesh polyester
RPET 110 gsm
Pole Fiberglass
Print Single-sided | Full colour
Wash instructions Machine wash at a maximum of 30°c
Size 2 sizes available
Print technique Sublimation
Weather conditions Can withstand storms and rain. It is recommended to take inside with wind force 7 or higher.
Quantity Possible to order from 1 piece
Transparency 95% see through
Design guidelines
We recommend using our templates and guides for preparing your print-ready PDF.

You can download our guides and templates in the template section. Remember to delete the template layers before exporting your design to PDF.

If you already have a design, no worries; we accept other file formats, including JPEG, PNG, or EPS.

For photographic content, high-resolution JPEGs are recommended, preferably without compression. For graphics or text-based content, we recommend print-ready, vector-based PDFs. For content that is a combination of graphics and photography, we suggest using print-ready PDFs to ensure the best quality.

Use CMYK as the colour mode.

Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2). If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Use the right values for full colour black.

Please note: The material used for a flag is very absorbent therefore the colour can come out lighter than expected. This is especially the case with black. For rich black please use (Cyan 60, Magenta 40, Yellow 40 & Black 100).

Resolution of at least 150 dpi.

Make sure the resolution of the images and graphics in your artwork are at least 150 dpi.

Add 5 mm bleed and keep 40 mm safety margin

During production, there might be a slight cut deviation. To avoid any issues, we recommend the following:

  • Add a 5 mm bleed around all edges of your design.
  • Keep important elements 40 mm away from the edge or folding lines.
Text and fonts specifications (Min. font size is 20 pt)

For this product, the minimum font size is 20 pt. To avoid any issues, we recommend the following:

  • Fonts must be embedded or outlined.
  • If your design contains small black text, make sure it is 100 % black (Cyan: 0 Magenta: 0 Yellow: 0 Black: 100).

Note that we don't check spelling or typographical errors.

Lines should be at least 3 pt.

The lines should be at least 3 pt.

Check your artwork for overprint.

Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.

Guide PDF
Teardrop flag - Small (70 x 180 cm) PDF Indesign
Teardrop flag - Large (100 x 250 cm) PDF Indesign
Frequently asked questions
What materials can I choose from?
  • Standard Flag Material: Classic 110 gsm flag canvas with a glossy look, great for advertising on busy shopping streets.

  • Longlife material: Strong 115 gsm fabric perforated with tiny holes. The holes make sure the flag can resist strong winds and a longer life is guaranteed. This material is best used in open areas or beaches.

  • Air Mesh Material: 120 gsm canvas with tiny holes for strong wind resistance, ideal for open areas and beaches. The printed colours on this material may appear slightly less bright than on standard flag material.

What is the lifespan of Teardrop Beachflag?
  • The lifespan of the flag is approx. 3 to 5 months while using it intensively. You can expand the lifespan by bringing the flags inside in harsh weather.

What wind power can flags withstand outside?
  • We advise bringing your flags inside if gale force reaches 7. This will greatly improve the lifespan of your flags.

What is the difference between the various pedestals and accessories, and how do they work?
  • Metal ground spike: The metal ground spike is ideal to place your beachflag outdoors on soft but firm ground, such as soil. The metal ground spike is best suited for smaller beachflags. For larger beachflags, we advise using the parasol base + rotator.

  • Plastic screw base: The plastic screw base is ideal when you want to place your beachflag on soft ground such as turf or sand. The plastic screw base can also be used for larger beachflags.

  • Cross Foot (indoor): The crossfoot is suitable for flat surfaces. The metal frame and 4 legs make sure it's extra steady. The crossfoot measures 85cm x 85cm and is 20cm high.

  • Cross foot + waterbag: The crossfoot is suitable for flat surfaces. The waterbag, added to the metal frame, provides additional stability and resistance. The crossfoot measures 85cm x 85cm and is 20cm high.

  • Parasol base + rotator: If you intend on using your beachflag outdoors, we recommend using this base and rotator. Your beachflag can spin around in the parasol base, drawing extra attention!

  • Light black plate This base is made of steel and has a classic black lacquer finish, giving it a sleek and classy look. The plate has movable stabilizers, allowing it to be used on various stable surfaces. The weight of this plate is 5.4 kg and dimensions are 40 x 40 cm.

How are the beachflags finished?
  • The beachflags are always finished on the leftside with a tunnel. On the top of the tunnel is an extra solid part so the beachflag itself does not get damaged by the flagpole.

  • Beachflags made from normal flag material are finished on the left side (opposite side of where the flag tunnel is) with a hem finished with double stitching.

  • Beachflags made of longlife material are finished on the left side with a lasercutting method. The flag gets cut off and heat sealed together. This means that longlife material does not need hemming and also expands the lifetime of your beachflag.

How can I set up my Teardrop Beachflag in the best way?
  • For the best set-up of your Teardrop Beachflag we recommend pulling your flag as far as possible through the flag tunnel so it's as tightly pulled as possible. This way your flag will not get creased and won't damage easily.

What is the diameter of the pole that comes with the flag?
  • The diameter of the pole that comes with the flag is ±2cm.

Are the Teardrop Beachflag printed single or double sided?
  • Our flags are printed on one side as standard. This means that your logo is visible as a mirror image on the back. The print-through of our flags is around 95%.

Is it possible to print my flag double-sided?
  • Our flags are printed single-sided by default.

Is it possible to print the tunnel strip in the design colours?
  • Unfortunately, this is currently not possible.

How do the colours come out in the print?
  • The colours printed on flag fabrics will never be as sharp as they are on your screen, especially the colour black. If you have any questions or concerns, please contact us.

Ordering process
Ordering with own design
Choose and configure: Choose the product, select your preferences and your desired delivery time.

Add to cart: Add to cart, review your preferences and edit/duplicate if needed. We recommend opting for Premium Artwork Check.

Checkout: Choose the delivery and invoice address.

Payment & design: Choose your preferred payment method in this step. You can also choose to upload your artwork first and pay at a later stage.

Design check: Upload your design. We'll send a digital proof for your approval before the order gets sent to production.

Sit back and relax!
Using editor design
Choose and configure: Find the best product for you, configure it and choose your delivery time.*

Design in the editor: Now you can upload and edit your artwork, if necessary, with the help of our editors. From here, you can add your product(s) to the cart.

Checkout: Choose the delivery and invoice address.

Payment: Choose your preferred payment method in this step.

Design check: We'll send a digital proof for your approval before the order gets sent to production.

Sit back and relax!

Colours: Black

Type: Flag, Pole & Carrybag

Number of designs

If you want to print different designs of the same product, select how many designs you want to order and set quantity per design.

Quantity per design

The number of designs cannot be zero. The number of designs cannot exceed the printrun. Please, adjust the total printrun or the number of designs selected. The total number of products per design cannot be lower than the total printrun. It is not possible to order more than 30 different designs. Need more designs? Go bespoke

Estimated delivery date

Upload and approve your files before: Monday, 4 November 2024 15:00

£80.99 Excl. VAT

Get an instant quote for this product via email

Want to save the product for later and receive a quote?

Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague or designer to order.

Your quote has been sent!

Your quote has been sent!

You will receive the product details within a minute. Take your time to consider it and come back to order with us!

Choose a size

What materials can I choose from?

    • Recycled Material

      Polyester material made from 100% recycled PET bottles. The material has a fine structure, is wind-permeable and is hemmed to prevent fraying. The colours on RPET material are bright and slightly glossy.

      Recycled Material
    • Air Mesh Material

      Air Mesh Material: 120 gsm canvas with tiny holes for strong wind resistance, ideal for open areas and beaches. The printed colours on this material may appear slightly less bright than on standard flag material.

      Air Mesh Material

Colours

Type

What options are available?

    • Cross Foot

      The cross foot is a standard that is suitable for flat surfaces. The metal frame and the four legs will provide extra strength. The cross foot has a size of 85 x 85 cm (20 cm high).

      Cross Foot
    • Cross Foot + Waterbag

      Looking for some extra reinforcement of your crossfoot base? Our Waterbag is what you need! Thanks to it, your beachflag will stay still in front of light wind. Just fill it with water and add it to your cross foot base, and you're ready to take your beachflag outside!

      Cross Foot + Waterbag
    • Wall suspension 0°

      Wall Suspension is essential to show off your flag in an eye-catching way. Perfect for presenting beach flags, nobody will pass by without seeing your advertisements! Choose from 3 options to ensure you can install your flag at the perfect angle. This super strong and durable product enables you to permanently show your flag wherever you like. It can be attached to many surfaces such as buildings, wood, cars, etc.

      Wall suspension 0°

Print run

Delivery

Are you ordering for ROI? Please, visit our new ROI website! Click here